Backwater Buzzbaits

Backwater Buzzbaits thumbnail
Mike Iaconelli

I had another experience fishing the Upper Mississippi River that I want to talk to everyone about. It was late summer when it happened but I think it’ll be pretty much universal as long as there are bass back in really skinny water.

There were some places in the backwaters and sloughs that were super shallow — I’m talking less than 2 feet of water — that were holding a good number of keeper bass. The thing was, though, that they were so choked with thin, slimy vegetation and drift that had washed into the water that it was hard to get anything back to the fish.

After several attempts with different lures I finally found something that worked perfectly, and it wasn’t all that specialized. I was able to use it right out of the box. It was a Molix Lover Buzz SS Mini. This lure had all the features I needed for the situation I faced.

Molix Lover Buzz SS Mini
Molix Lover Buzz SS Mini

For openers it’s an inline design. That makes it different from most other buzzbaits. It’s come through stringy vegetation and small wood like it wasn’t even there. The blade keeps turning no matter what. And, even when something did foul the blade I was able to shake it loose with just a twitch or two. I didn’t have to jerk hard and ruin the whole cast.

And, it weighs in at only a 1/4-ounce so there isn’t a big splash to scare the bass when it hits the water. All around, it’s the perfect lure for a shallow, topwater bite.

On the day I was fishing color really mattered. My best combination was a black skirt and a silver blade. I tried all sorts of other color combinations but they didn’t work nearly as well as black and silver. I’d tell you why that was if I knew. But, I don’t and so I can’t.

VMC Ike Approved Trailer Hook
VMC Ike Approved Trailer Hook

I was getting a number of short strikes so I armed it with a No. 1, VMC Trailer Hook. That solved the problem and didn’t cause me any problems with hangups.

My rod was a 7 foot, 6 inch medium action, Abu Garcia Ike Finesse Series Spinning Rod. I wanted the extra length so I could make long casts and I wanted the softer action to help me get solid hooksets when my lure was way out there.

Abu Garcia IKE Finesse Series Spinning Rod & Abu Garcia REVO IKE Spinning Reel
Abu Garcia IKE Finesse Series Spinning Rod & Abu Garcia REVO IKE Spinning Reel

My reel was an Abu Garcia REVO IKE Spinning Reel, 30 size. I spooled it with all braid, 10-pound-test Berkley X5 Braided Line. There was no need for a leader of any kind so I didn’t use one. When bass zero in on a buzzbait they aren’t paying attention to anything other than the ruckus the blade is making. Line visibility means nothing.

Here’s the lesson from all of this: When you’re targeting really shallow bass that are hard to get to because of the condition of the water, think about using a Molix Lover Buzz SS Mini. I always keep a couple of them in my boat. You should, too. And, a pack of VMC Trailer Hooks won’t hurt anything, either.

Berkley X5 Braided Line
Berkley X5 Braided Line

Go catch ‘em!

___________________________________________

Like Ike on Facebook,  and follow him on Instagram for fishing and fun content.

Subscribe to Mike’s YouTube channel, Going Ike,  to ensure you see every adventure video.

Return to Mike Iaconelli’s website

Suspended Bass in Rivers?

Suspended Bass in Rivers? thumbnail
Mike Iaconelli

Life’s crazy, man! A few weeks ago on the Upper Mississippi River I had an experience that might help you sometime in the future so I’m going to tell you all about it.

Usually you find river bass shallow. That didn’t happen to me, though. They were deep and they were suspended. It sounds crazy but it’s true. I caught them in two types of places and with two different lures.

Here’s how it went down…

The first place I found them was out in the main river over the channel. They were suspended anywhere between 10 and 30 feet deep. They weren’t moving much, either. They were just hanging out down there.

It wasn’t that they were relating to anything other than the baitfish — shad. There was no cover at all and no structure other than the channel, and it was way below them. They were holding right in with the baitfish so tight that it was hard to see them with my electronics.

And I’m telling you there were tons of them. They were thick like there was nowhere else for them to go and so every bass in the river decided that the channel was the place to go and hang out for a while. I can’t get over it. Really, I can’t.

The other place I found them was in the marinas and anywhere — like along the bank in the main river — there was a big boat moored over deep water. One thing about their location that intrigued me was that they seemed to like barges the best, and the heavier they were loaded the better. There weren’t as many in the marinas and under the boats but the numbers were still good.

Rapala RipStop
Rapala RipStop

Matching the hatch was the key to catching them. I fished with a Rapala RipStop hard jerkbait in the #9 size. It’s right at 3 1/2-inches long. My color choice was Moss Back Shiner. Taken together the size and color made my lure look exactly like the local shad population.

Abu Garcia IKE Finesse Series Spinning Rod & Abu Garcia REVO IKE Spinning Reel
Abu Garcia IKE Finesse Series Spinning Rod & Abu Garcia REVO IKE Spinning Reel

But the real thing that made it so effective was that it behaved like the real thing. The RipStop will stop on a dime and in some cases actually back up a little bit with a wiggle. It’ll do that because it has a lip on the back as well as on the front, and because it has a special weighting system in it.

My RipStop only weighed 1/4-ounce so I went with spinning tackle because I could make long casts. The trick was to keep the bait above them They’d eat it like crazy that way but if it was below them they wouldn’t give it so much as a second look.

Berkley X5 Braided & Trilene 100% Fluorocarbon Leader
Berkley X5 Braided Line & Trilene 100% Fluorocarbon Leader

 My rod was a 7 foot, medium action Abu Garcia IKE Finesse Spinning Rod. I mounted a size 20 Abu Garcia REVO IKE Spinning Reel to it and spooled-up with 10-pound-test Berkley X5 Braided Line as my main line. And, I made a long leader out of 8-pound-test Berkley Trilene 100% Fluorocarbon.

Sometimes they’d get conditioned to my RipStop — in both places — and so I switched to a Berkley Powerbait Power Swimmer Swimbait. They’re small. I used the 2.8-inch version. The plastic is really responsive so they look and feel like the real thing. My color was French Pearl. Just like with the RipStop, I wanted to match the hatch.

Berkley Powerbait Power Swimmer Swimbait, French Pearl
Berkley Powerbait Power Swimmer Swimbait, French Pearl

My head was a 1/4-ounce, VMC Finesse Half Moon Jig Head. It gave me just a little bit of shake and shimmer which was just what I needed to attract bites.

I fished my Power Swimmer with the same rod, reel and line that I used for my RipStop.

VMC Finesse Half Moon Jig Head
VMC Finesse Half Moon Jig Head

And the same thing happened with the Power Swimmer that happened with my jerkbait when it came to getting bites. They’d hit it if it was above them but would ignore it if it was below them.

So here’s the thing: Don’t ever get trapped into rigid thinking about bass fishing. I know river bass are supposed to be shallow but no one bothered to tell the Upper Mississippi River bass that. They were deep. I guess they didn’t know any better.

____________________________________________________

Like Ike on Facebook,  and follow him on Instagram for fishing and fun content.

Subscribe to Mike’s YouTube channel, Going Ike,  to ensure you see every adventure video.

Return to Mike Iaconelli’s website